SCARICA SCHEDA TECNICA / DOWNLOAD DATA SHEET (314.91 KB)Lightweight clamp with extra large jaw opening
Application:
• For vertical lifting, handling and transporting of Holland Profile (HP), shipbuilding structures, steel plates and structures
• Turning lathe clamp
• TSHP jaw opening from 0 to 80 mm
• TSHP-A adjustable jaw opening available from: 0 to 155 mm
• TSHP / TSHP-A Working load limit (WLL) 1000 - 1500 kg
• Higher WLL available upon request
• Lifting of longer sections should be done with a spreader beam
Note: The plate surface of the material must have a hardness level of max. HRC 37/345 Hb
Features and Benefits:
• Also useful as a “big-jaw” opening clamp
• Standard with 3 pivots for extra powerful clamping force
• Easy handling of workpieces in and out of lathe due to extra small W-dimensions
• Lightweight design for easy handling
• Tough quality heavy duty welded shell body
• Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered
• Clamp is locked in closed as well as open position
• Maintenance-friendly, easy to exchange parts which are available upon request
"Il Titolare non si assume alcuna responsabilità nei confronti degli utenti naviganti del sito in merito al contenuto di quanto pubblicato sul sito stesso (accuratezza e completezza delle informazioni fornite o riguardo un eventuale uso che terzi ne potranno fare). Il materiale e le suddette informazioni comprese nel sito sono soggette a cambiamenti o aggiornamenti, apportabili in qualsiasi momento, da parte del Titolare."
"The Owner assumes no responsibility towards users navigating his site with regard to the content published on the site itself (accuracy and completeness of the information provided or regarding any use that third parties may make of it). All the material and the aforementioned information included in this site are subject to changes or updates, which can be carried out at any time by the same Owner."
ALIOTO GROUP SRL - Via Tavolara, 37 - 19033 Castelnuovo Magra (SP), ITALY
Cod. Fiscale e P. IVA 01099210112 - Capitale Sociale €. 2.552.000,00 interamente versato.
Tel. +39 0187 677711 - Fax +39 0187 676063 - Mail [email protected]
Uffici di rappresentanza in UAE
48 Burj Gate, 10th Floor, room #1001, Downtown, Dubai (EAU) | 7th Floor - CI Tower - khalidiya Area - Abu Dhabi