PUNTO DI ANCORAGGIO A SALDARE CON MOLLA 8-057

- Pivot through 180°
- Manufactured from forged alloy steel, quenched and tempered
- Manufactured and tested in accordance with EN1677-1
- Load  rated parts are 100% magnaflux crack detected
- Individual forged parts are traceable to Test Certification
- Proof tested to 2.5 times the WLL
- Fatigue rated to 20,000 cycles at 1.5 times the WLL
- All YOKE Lifting points  meet  or exceed all the requirements of ASME B30.26
- WLL forged onto each product for quick and easy identification
- Lugs designed to assist the welding process
- A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations
- Never apply  load except in the same direction with the pivot direction




"Il Titolare non si assume alcuna responsabilità nei confronti degli utenti naviganti del sito in merito al contenuto di quanto pubblicato sul sito stesso (accuratezza e completezza delle informazioni fornite o riguardo un eventuale uso che terzi ne potranno fare). Il materiale e le suddette informazioni comprese nel sito sono soggette a cambiamenti o aggiornamenti, apportabili in qualsiasi momento, da parte del Titolare."

"The Owner assumes no responsibility towards users navigating his site with regard to the content published on the site itself (accuracy and completeness of the information provided or regarding any use that third parties may make of it). All the material and the aforementioned information included in this site are subject to changes or updates, which can be carried out at any time by the same Owner."

Italiano

Recensioni per PUNTO DI ANCORAGGIO A SALDARE CON MOLLA 8-057

WELD ON POINT 8-057

Prodotti Correlati a questa categoria

GOLFARE FEMMINA DIN 582

HOIST RING 8-203

GOLFARE GIREVOLE CON ANELLO 8-251

PUNTO DI ANCORAGGIO A SALDARE CON MOLLA 8-057