ADVANTAGES OVER CONVENTIONAL SYSTEMS
- Reduced leadtime during both loading and unloading of the work-piece
- Increased safety: no more risky slinging operations required
- Easily accessible and better exploitable work-piece surface
- Increased gripping versatility in case of pieces with different shapes and sizes or with uneven surfaces
- No deformation and/or damage to the work-piece caused by mechanical clamping
TECHICAL FEATURES
- STURDINESS: the dimensions of each component have been correctly calibrated to ensure a high resistance to wear over time. Especially the Mag and Demag lever has been designed to withstand accidental impacts during free positioning of the lifting magnet. The sturdiness and interchangeability of all removable components (from the lifting hook to the containment plates and the cam guide of the lever) guarantee minimum maintenance costs
- SAFETY: the safety coefficient 3:1, required by current legal standards, has been deliberately increased by 10-15% to ensure a high level of reliability over a long period of time
- RELIABILITY: the production process includes thehomogeneous polarisation of the magnets only after the lifting magnet has been fully assembled, in order to create a perfectly balanced magnetic field on the inside. The production cycle is completed by the final testing, performed on each lifting magnet and guaranteed by the attached certificate
ACCESSORIES
- It is possible to mount profilable and interchangeable pole extensions for uneven surfaces and low thicknesses
- Lifting beams for long and/or large loads (MHT)
"Il Titolare non si assume alcuna responsabilità nei confronti degli utenti naviganti del sito in merito al contenuto di quanto pubblicato sul sito stesso (accuratezza e completezza delle informazioni fornite o riguardo un eventuale uso che terzi ne potranno fare). Il materiale e le suddette informazioni comprese nel sito sono soggette a cambiamenti o aggiornamenti, apportabili in qualsiasi momento, da parte del Titolare."
"The Owner assumes no responsibility towards users navigating his site with regard to the content published on the site itself (accuracy and completeness of the information provided or regarding any use that third parties may make of it). All the material and the aforementioned information included in this site are subject to changes or updates, which can be carried out at any time by the same Owner."
ALIOTO GROUP SRL - Via Tavolara, 37 - 19033 Castelnuovo Magra (SP), ITALY
Cod. Fiscale and P. IVA 01099210112 - Share Capital €. 2.552.000,00 fully paid.
Phone. +39 0187 677711 - Fax +39 0187 676063 - Mail [email protected]
Representative offices in UAE
48 Burj Gate, 10th Floor, room #1001, Downtown, Dubai (EAU) | 7th Floor - CI Tower - khalidiya Area - Abu Dhabi
