Main Features
The Tiger ROV compatible chain block is available in various different interface options all in accordance with BS ISO 13628-8:2002 ROV Interfaces on Subsea production systems. Tested and finished in accordance with Annex’s B & K of BS ISO 13628-1:2005:
1. Hydraulic Hot Stab connection dual port type A and B
2. Rotary Torque Receptacle Classes 1,2 & 3
3. D Handle, T-bar or Fishtail Direct Drive manual connection
4. QD Direct Drive Couplings
Available as a 3.0 tonne (single fall of load chain), 10 tonne (3 falls), 15 tonne (5 falls) and 20 tonne single head (6 falls) capacity chain blocks, chained up to project specific heights of lift (H.O.L) that can be pre-set to meet the exact starting point required within the rigging drawings.
"Il Titolare non si assume alcuna responsabilità nei confronti degli utenti naviganti del sito in merito al contenuto di quanto pubblicato sul sito stesso (accuratezza e completezza delle informazioni fornite o riguardo un eventuale uso che terzi ne potranno fare). Il materiale e le suddette informazioni comprese nel sito sono soggette a cambiamenti o aggiornamenti, apportabili in qualsiasi momento, da parte del Titolare."
"The Owner assumes no responsibility towards users navigating his site with regard to the content published on the site itself (accuracy and completeness of the information provided or regarding any use that third parties may make of it). All the material and the aforementioned information included in this site are subject to changes or updates, which can be carried out at any time by the same Owner."
ALIOTO GROUP SRL - Via Tavolara, 37 - 19033 Castelnuovo Magra (SP), ITALY
Cod. Fiscale and P. IVA 01099210112 - Share Capital €. 2.552.000,00 fully paid.
Phone. +39 0187 677711 - Fax +39 0187 676063 - Mail [email protected]
Representative offices in UAE
48 Burj Gate, 10th Floor, room #1001, Downtown, Dubai (EAU) | 7th Floor - CI Tower - khalidiya Area - Abu Dhabi
